Under-desk cable tray for a gaming setup
Under-desk cable tray generated for a gaming setup starts at 480 × 185 × 95 mm and 1.6 kg in Stainless steel 304 — €424 including VAT, delivered in about 9 working days, or €74 if you can wait 39. The design load goes up and the deflection budget stays the same, so the section depth grows rather than the material getting exotic. The engine sizes the deck against a 1.5 mm deflection limit at your stated load.
What a gaming setup actually demands
A gaming desk carries more mass than any other desk: an ultrawide or two panels, a headset that lives on the desk, and a power brick that nobody ever finds a home for.
The design load goes up and the deflection budget stays the same, so the section depth grows rather than the material getting exotic. The engine sizes the deck against a 1.5 mm deflection limit at your stated load.
The starting point this page generated
Everything in the specification below was computed, not written. We passed “under-desk cable tray wide and sturdy, heavier load” to the same generator the configurator uses, and this is what came back: a buildable under-desk cable tray with every dimension inside the range the partner factory has qualified.
It is a starting point, not a product. Change any parameter in the configurator and the mass, the price, the tolerances and the manufacturability findings all recompute before you order.
Why this one can ship in days
Because the part that carries your dimensions is made by sheet metal (laser + brake) — a process with no tooling to cut first. A mould would mean thirty-eight days before the first part existed; this starts the same day the order does.
General dimensions hold ISO 2768-m, which at this size means ±0.8 mm; the fits that matter carry explicit ISO 286 callouts in the table above. The batch lane makes the same geometry by moulding or nesting it in a production run and sends it by sea: €74 in about 39 working days.