PCB enclosure for a hardware prototype
PCB enclosure generated for a hardware prototype starts at 106 × 66 × 28 mm and 58 g in PA12 + 30% glass fibre — €34 including VAT, delivered in about 8 working days, or €29 if you can wait 38. What matters here is turnaround and iteration cost, not unit price. Printed housings, no tooling, and a revision hash so version four is traceably different from version three rather than "the one with the taller standoffs".
What a hardware prototype actually demands
You have a board that works on the bench and a demo in three weeks. The electronics are the part you have under control; the box around them is the part that quietly eats the calendar.
What matters here is turnaround and iteration cost, not unit price. Printed housings, no tooling, and a revision hash so version four is traceably different from version three rather than "the one with the taller standoffs".
The starting point this page generated
Everything in the specification below was computed, not written. We passed “pcb enclosure for a prototype board, 10 units” to the same generator the configurator uses, and this is what came back: a buildable pcb enclosure with every dimension inside the range the partner factory has qualified.
It is a starting point, not a product. Change any parameter in the configurator and the mass, the price, the tolerances and the manufacturability findings all recompute before you order.
Why this one can ship in days
Because the part that carries your dimensions is made by sls 3d printing — a process with no tooling to cut first. A mould would mean weeks before the first part existed; this starts the same day the order does.
General dimensions hold ISO 2768-m, which at this size means ±0.3 mm; the fits that matter carry explicit ISO 286 callouts in the table above. The batch lane makes the same geometry by moulding or nesting it in a production run and sends it by sea: €29 in about 38 working days.