Under-desk cable tray for a recording desk
Under-desk cable tray generated for a recording desk starts at 480 × 185 × 95 mm and 1.3 kg in Stainless steel 304 — €409 including VAT, delivered in about 9 working days, or €64 if you can wait 39. The yoke radius is matched to the headband so that contact is spread over at least 60 mm of pad, and the stand is tall enough that the cups hang clear of the desk surface.
What a recording desk actually demands
Studio headphones are heavy, expensive, and left on the desk between takes. The failure mode is not dropping them; it is the slow crease that a narrow hook presses into the headband foam over a year.
The yoke radius is matched to the headband so that contact is spread over at least 60 mm of pad, and the stand is tall enough that the cups hang clear of the desk surface.
The starting point this page generated
Everything in the specification below was computed, not written. We passed “under-desk cable tray wider yoke, taller” to the same generator the configurator uses, and this is what came back: a buildable under-desk cable tray with every dimension inside the range the partner factory has qualified.
It is a starting point, not a product. Change any parameter in the configurator and the mass, the price, the tolerances and the manufacturability findings all recompute before you order.
Why this one can ship in days
Because the part that carries your dimensions is made by sheet metal (laser + brake) — a process with no tooling to cut first. A mould would mean thirty-eight days before the first part existed; this starts the same day the order does.
General dimensions hold ISO 2768-m, which at this size means ±0.8 mm; the fits that matter carry explicit ISO 286 callouts in the table above. The batch lane makes the same geometry by moulding or nesting it in a production run and sends it by sea: €64 in about 39 working days.