Headphone stand for a gaming setup
Headphone stand generated for a gaming setup starts at 186 × 128 × 285 mm and 676 g in Aluminium 6061-T6 — €99 including VAT, delivered in about 8 working days, or €54 if you can wait 38. The design load goes up and the deflection budget stays the same, so the section depth grows rather than the material getting exotic. The engine sizes the deck against a 1.5 mm deflection limit at your stated load.
What a gaming setup actually demands
A gaming desk carries more mass than any other desk: an ultrawide or two panels, a headset that lives on the desk, and a power brick that nobody ever finds a home for.
The design load goes up and the deflection budget stays the same, so the section depth grows rather than the material getting exotic. The engine sizes the deck against a 1.5 mm deflection limit at your stated load.
The starting point this page generated
Everything in the specification below was computed, not written. We passed “headphone stand wide and sturdy, heavier load” to the same generator the configurator uses, and this is what came back: a buildable headphone stand with every dimension inside the range the partner factory has qualified.
It is a starting point, not a product. Change any parameter in the configurator and the mass, the price, the tolerances and the manufacturability findings all recompute before you order.
Why this one can ship in days
Because most of it already exists. Turned base is a platform part — identical in every configuration, made in volume and held in stock. Only post and yoke are made for your order, by cut to length from stock, which starts the same day because it needs no tooling.
General dimensions hold ISO 2768-m, which at this size means ±0.5 mm; the fits that matter carry explicit ISO 286 callouts in the table above. The batch lane makes the same geometry by moulding or nesting it in a production run and sends it by sea: €54 in about 38 working days.