Headphone stand for a home office
Headphone stand generated for a home office starts at 186 × 128 × 285 mm and 676 g in Aluminium 6061-T6 — €99 including VAT, delivered in about 8 working days, or €54 if you can wait 38. The constraint is visual, not mechanical: matte finishes, no logos, no blue status LEDs, and a cable path that ends somewhere other than the middle of the floor.
What a home office actually demands
A home office is a room that has to stop being an office at six o’clock. Everything on the desk is also furniture in a room somebody lives in, which rules out most of what the category sells.
The constraint is visual, not mechanical: matte finishes, no logos, no blue status LEDs, and a cable path that ends somewhere other than the middle of the floor.
The starting point this page generated
Everything in the specification below was computed, not written. We passed “headphone stand for a home office desk” to the same generator the configurator uses, and this is what came back: a buildable headphone stand with every dimension inside the range the partner factory has qualified.
It is a starting point, not a product. Change any parameter in the configurator and the mass, the price, the tolerances and the manufacturability findings all recompute before you order.
Why this one can ship in days
Because most of it already exists. Turned base is a platform part — identical in every configuration, made in volume and held in stock. Only post and yoke are made for your order, by cut to length from stock, which starts the same day because it needs no tooling.
General dimensions hold ISO 2768-m, which at this size means ±0.5 mm; the fits that matter carry explicit ISO 286 callouts in the table above. The batch lane makes the same geometry by moulding or nesting it in a production run and sends it by sea: €54 in about 38 working days.