Phone mount for a home office
Phone mount generated for a home office starts at 88 × 82 × 93 mm and 63 g in PA12 + 30% glass fibre — €39 including VAT, delivered in about 8 working days, or €19 if you can wait 38. The constraint is visual, not mechanical: matte finishes, no logos, no blue status LEDs, and a cable path that ends somewhere other than the middle of the floor.
What a home office actually demands
A home office is a room that has to stop being an office at six o’clock. Everything on the desk is also furniture in a room somebody lives in, which rules out most of what the category sells.
The constraint is visual, not mechanical: matte finishes, no logos, no blue status LEDs, and a cable path that ends somewhere other than the middle of the floor.
The starting point this page generated
Everything in the specification below was computed, not written. We passed “phone mount for a home office desk” to the same generator the configurator uses, and this is what came back: a buildable phone mount with every dimension inside the range the partner factory has qualified.
It is a starting point, not a product. Change any parameter in the configurator and the mass, the price, the tolerances and the manufacturability findings all recompute before you order.
Why this one can ship in days
Because the part that carries your dimensions is made by sls 3d printing — a process with no tooling to cut first. A mould would mean thirty-eight days before the first part existed; this starts the same day the order does.
General dimensions hold ISO 2768-m, which at this size means ±0.3 mm; the fits that matter carry explicit ISO 286 callouts in the table above. The batch lane makes the same geometry by moulding or nesting it in a production run and sends it by sea: €19 in about 38 working days.