Phone mount for a standing desk
Phone mount generated for a standing desk starts at 88 × 82 × 93 mm and 63 g in PA12 + 30% glass fibre — €39 including VAT, delivered in about 8 working days, or €19 if you can wait 38. Two things follow. The geometry is set for the standing position, because that is where posture actually fails; and the cable run needs slack that travels with the top instead of tugging from the wall.
What a standing desk actually demands
A sit-stand desk moves through 400 mm of travel several times a day, and everything on it moves with it. Height that was right seated is wrong standing, and every cable gets pulled twice a day.
Two things follow. The geometry is set for the standing position, because that is where posture actually fails; and the cable run needs slack that travels with the top instead of tugging from the wall.
The starting point this page generated
Everything in the specification below was computed, not written. We passed “phone mount for a standing desk, taller and heavier base” to the same generator the configurator uses, and this is what came back: a buildable phone mount with every dimension inside the range the partner factory has qualified.
It is a starting point, not a product. Change any parameter in the configurator and the mass, the price, the tolerances and the manufacturability findings all recompute before you order.
Why this one can ship in days
Because the part that carries your dimensions is made by sls 3d printing — a process with no tooling to cut first. A mould would mean thirty-eight days before the first part existed; this starts the same day the order does.
General dimensions hold ISO 2768-m, which at this size means ±0.3 mm; the fits that matter carry explicit ISO 286 callouts in the table above. The batch lane makes the same geometry by moulding or nesting it in a production run and sends it by sea: €19 in about 38 working days.